Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory.
This projector makes 3 memory indexes available for each of the picture modes.
❖ For a video signal input, the following adjustments can be made:
NOTE:
- You cannot adjust Tint in Component signal (YC
BCR/YPBPR)
or PAL format signal.
- When the index is set to default, picture quality cannot be
selected. To adjust picture quality, set the index to 1 - 3.
See “Preset”. (
☞
P.32)
❖ Contrast
❖ Color Temp. (Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
❖ Setting the Picture Adjust Menu
1. Select the desired menu item and press the 2 button.
An adjustment bar appears on the screen.
2. Press the 1 and 2 buttons to adjust picture quality.
3. Press the 3 button to enter the adjustment and return to menu item selection.
3.
3.
Color Temp. 2
