11
ENGLISH
PLAYING TRACKS IN A SPECIFIC
SEQUENCE
(PROGRAM PLAY)
You can arrange and play tracks in a specific
sequence. Up to 30 tracks to be played can be
programmed.
(Example: To program the 7th track after 15th
track in a disc with 25 tracks)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 5678 91011 12 13 14 1516 17 18 19 20 STEREO
q Press
button on the remote in stop
mode. “PROG” indicator will light up and it goes
to program mode.
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 5678 91011 12 13 14 1516 17 18 19 20 STEREO
w Choose a track to be programmed with numeric
buttons on the remote.
(Example: The 15th track is chosen and it’s
length is 4min30sec)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 5678 91011 12 13 14 1516 17 18 19 20 STEREO
e With the sequence described in step w above,
program another track. Repeat that sequence to
program all the tracks you want. You can program
up to 30 tracks.
(Example: The 7th track is chosen and total
length of 7th and 15th is 7min50sec)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 567 8 9101112 1314 15 16 17 18 1920 STEREO
r Press
button to starts playback in
programmed order.
* When 21 or more tracks are programmed, will
light up instead of the track number indicator.
Lights up
Lights up
Only the numbers of
programmed tracks light up
1st track programmed
Lights up
Total playing time of
programmed tracks
Total programmed number
To Check the Programmed Tracks
Press the
button on the remote
control during the program or when the program is
stopped (“PROG” lights up).
Every time press
button, the
programmed tracks will be displayed one after the
other in order.
To Delete a Programmed Track
q
Press
button in stop mode when program
has been made (When “PROG” indicator is
lighting up).
w
Every time press
button, the programmed
tracks are deleted in order from the last track
programmed.
Also, the deleted track’s track number indicator
will disappear.
To Clear Whole Program
Press
button two times while in program
play. In the stop mode, press
button once.
Program can also be cleared by pressing
key to open the disc tray.
To Add Tracks to Program
Tracks can be added to the end of program when
program is remaining (“PROG” indicator is lighting
up) and in stop mode.
However tracks cannot be added to the program
when the RNDM (random) indicator is lighting up.
* Please be careful about the following matters.
• When programming 1st through 9th tracks in a
disc that has over 10 tracks by using numeric
buttons. For instance, programming the 3rd track
after programming the 1st track, press 3 button
more than approximately 1.5 seconds after 1
button is pressed. When a program is finalized,
the time is updated.
• Likewise, when programming a track at 10th or
after. For example, to program 13th track, press
3 button within approximately 1.5 seconds after
1 button is pressed.
• When programming a track in a disc that has less
than 9 tracks. For instance, to program the 5th
track after 4th track has been programmed, press
5 button more than approximately 0.5 second after
4 button is pressed.
Q&A
• How many tracks can be programmed?
Up to 30 tracks can be programmed for
program play.
• Can I listen to program play repeatedly?
Press
button once. “ ” “ALL”
indicator will light and program play will
be repeated.
• Can I shuffle the programmed track order?
Press
button in stop mode.
SEARCHING YOUR FAVORITE
TRACKS
(AMS (AUTOMATIC MUSIC
SCAN) PLAY)
This feature is convenient to search where your
favorite track is.
If
button on the remote is pressed in stop
mode, the PLAY “3” indicator will blink and the
beginnings of all the tracks will be played for 10
seconds each starting from the first track.
Also, if the
button is pressed during playback,
the PLAY indicator “3” will blink, and the program
will jump to the next track after a display time of
approximately 10 seconds.
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 5678 91011 12 13 14 1516 17 18 19 20 STEREO
When you find a song that you want to listen to, press
the
button again or press the
button.
PLAY indicator will light up constantly and normal
playback will begin from the current track.
* If the
button is pressed after the tracks are
programmed, only the programmed tracks are
played by AMS.
Light up
QUICK REPLAY
When
button is pressed during
playback, the unit goes back to the amount of time
set by the MENU and starts playback from there.
* Playback that goes beyond the track is not allowed.
Also, when the total time of the track being played
is shorter than the time set for quick replay, or when
the playback time is shorter than the time set for
quick replay, if
button is pressed, the
track will be goes back to the start of that track and
playback is started from there.
To Set Quick Replay Time
q If a disc is loaded in the disc tray, eject the disc
and close the tray.
w Press the
button on the remote control.
e Press the
button on the remote control
while Quick Replay is displayed (approx. 3
seconds). The current time setting appears on the
display. (The default setting is 10 seconds.)
r Use the or button to set the time. (10
seconds/20 seconds/30 seconds)
t After making the setting, press the
button
twice. The display returns to the normal display.
y The time setting is retained even when the power
is turned off.
Caution:
* When there is no key input for about 4 seconds
during this series of operations, the setting will be
configured to the conditions at that time and the
display will return the time display.
06.1.25, 3:42 PMPage 11
