A SERVICE OF

logo

94
Connecting an external control device
DC OUT jack
When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled
through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
12 V/150 mA trigger-compatible device
NOTE
•Use the monaural mini-plug cable for connecting DC OUT jacks. Do not use the stereo mini-plug cable.
•If the permissible trigger input level for the connected device is larger than 12 V/150 mA, or has shorted,
the DC OUT jack cannot be used. In this case, turn o the power to the unit, and disconnect it.
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD