26
Power amp
•Connect a power amp (sold separately) to the PRE OUT terminal of this unit.
•This unit has an UNBALANCED PRE OUT terminal and BALANCED PRE OUT terminal. Connect to the
correct terminal for your power amp.
•Connect the speakers to the power amp.
•For details on speaker connections, see the User Guide for the power amp.
•This section shows how to make a 7.1 ch connection by using a surround speaker. For how to make
other speaker connections, see page86.
n Example of connections to marantz MM7055 and MM7025
power amp
Connecting the unbalanced PRE OUT terminal
SBL SBR
FL FR
C
SL
SR
SW
Speaker cables
(sold separately)
Audio cable
(sold separately)
Subwoofer with
built-in amplifier
GMM7055H
GMM7025H
Connecting the balanced PRE OUT terminal
SBL SBR
FL FR
C
SL
SR
SW
Speaker cables
(sold separately)
Audio cable
(sold separately)
Subwoofer with
built-in amplifier
GMM7055H
GMM7025H
GAV7701 XLR connector PIN
arrangementH
1
2
3
q GND (Ground)
w HOT (Hot)
e COLD (Cold)
The PIN arrangement in this device uses the
European method.
In the USA method,
w is COLD, and e is HOT.
When connecting a device that utilizes the USA
type of PIN arrangement, replace
the w and e plugs on one side of the balanced
cable.
NOTE
Do not short the HOT and GND or COLD and
GND for use.
