6
Press [PLAY B]. Then press
[PAUSE F] at the point you
wish to start recording.
7
Press [DUBBING].
DVD to VCR duplication will start.
8
Press [STOP C] to stop the
recording.
XXXX (cont’d)
Dubbing Mode (cont’d)
6
Press [PLAY B]. Then press
[PAUSE F] at the point you
wish to start recording.
• Since it takes about a few
seconds before the actual
dubbing begins, please
allow extra 5 seconds when
selecting the starting point.
7
Press [DUBBING].
VCR to DVD duplication will start.
8
Press [STOP C] to stop the
recording.
Note
• When you turn off the unit
after setting the Dubbing
Mode to DVD VCR, the
setting will be set to
VCR DVD automatically.
• Dubbing Mode is available
only if the videotape or disc is
not copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
For Audio CD to VCR
duplication:
• This function is available on
Audio CDs, not MP3 files.
For VCR to DVD duplication:
• The playback sound mode
is followed by the setting of
VCR playback sound mode
on page 76. Set the playback
sound mode to which you
wish to record to the DVD.
• This unit will automatically
stop the duplication if
playback with no image is for
more than 3 minutes during
VCR to DVD duplication.
Recording
