NOTE
A utility called
PCIScope
is also useful for verification and debugging
purposes. See Page 32 for more information.
Windows NT Instructions
WARNING
You WILL be prompted to Shut Down and Reboot your system severa
times during software installation. Please be patient, each Shut Down
and Reboot does serve a purpose and is required for correc
installation. If you Shut Down and Reboot when requested, it may save
you from having to make a call to MAGMA Technical Support.
NOTE
Prior to installing the MAGMA CardBus Driver, you should be familia
with the installation procedures for the PCI cards that you are installing
in the expansion chassis. Some PCI card manufacturers recommend
that you install their software driver(s) prior to installing the hardware
If this is the case, you should install their driver before you connect and
power up the expansion chassis. You may be required to reboot before
connecting the expansion chassis.
