Page 4 of 9 Installation Instruction Sheet
LXE Spire Indoor/Outdoor Antenna Installation E-INS-6000SPIRE-F
Safety
The Spire bracket has been designed to attach to a wall, mast, I-beam or pole. To prevent
personal injury or equipment damage, the antenna must be securely mounted to each
plane per instructions.
WARNING
!
Antenna installations must be grounded according to local and national
codes. For your safety and others, do not install or work on antennas
near power lines. Install and repair all antennas or similar structures
out of falling distance of all such lines. Every electrical and telephone
wire is potentially dangerous.
CAUTION
!
This antenna is a low power microwave device. Always mount the
antenna at least seven inches away from personnel.
Location
The location of the antenna is important. Objects such as metal columns, walls, etc. will
reduce efficiency. Best performance is achieved when this antenna is mounted at 8’ to
40’ above floor level. If reception is poor, it's a good idea to try a few different mounting
positions to optimize reception.
Dual Spires
If using two antennas on one radio for space diversity, there needs to be 3’ to 8’ of
separation between the antennas.
