DVR HOOKUP
27
Before Operation (Continued)
DV Rec Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
TV Rec Audio
When TV recording with bilingual, you can choose
audio channel to record.
Main+Sub: Main language and Sub language
Main: Main language only
Sub: Sub language only
Auto Chapter
When recording, chapter markers are put in specified
setting. You can change this interval to 5 minutes,
10 minutes, or 15 minutes. If you select None, switch off
automatic chapter marking altogether with the No
Separation setting.
Disc
Disc Format
If you load a completely blank disc, the recorder will ini-
tialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The recorder initialize the disc to VR mode.
DVD+R: The Initialize menu will appears. Select “Yes”
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
mode.
Also, you can format the disc from the Setup menu as
below.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the Disc option.
33
While the Disc option is selected, press B to
move to the second level.
44
Use v / V to select the Disc Format option.
55
Press B to move to the third level.
Start icon is highlighted.
66
Press ENTER.
Disc Format menu appears.
77
In case of DVD-RW, use b / B to select a desired
Disc Format Mode (VR Mode or Video Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
88
Use b / B to select “Ok” then press ENTER.
It takes a few moments to format the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
All data on the disc will be deleted.
