5: Commands and Levels
XPort Pro Command Reference 59
Does not watch the modem control pin to disconnect.
Watches the modem control pin and disconnects if it is not
asserted.
Removes the stop character.
Disables disconnect after timeout feature for tunneling
sessions.
Displays the current configuration.
show history Displays the last 20 commands entered during the current
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
<milliseconds>
Disconnects when no data has been received on the line
(serial port) for the
specified length of time.
<milliseconds> = timeout in milliseconds.
Stores the current configuration in permanent memory.
Exits to the enable level.
Return a lookup on the DNS name or IP address.
Removes all entries from the DNS Cache.
Removes an entry from the DNS Cache.
Show DNS status and cache entries.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
email 1 (email:1) level commands
Continuously displays email statistics.
Sets Cc addresses for email alerts.
<text> = a quoted, semicolon separated list of email ad-
Clears all entries from the mail log.
Sets the email counters to zero.
Enters the next lower level.
Sets the local port (used to send email alerts) to random.
Sets X-Priority for email alerts to 3 (normal).
default server port Restores the factory default port for SMTP on the server
Enters the configure email level.
Exits to the enable level.
Sets the From address for email alerts.
<text> = email address to place in the From field of the
Sets the local port used to send email alerts.
<number> local port to use for email alerts.
Specifies a text file, the contents of which will be the mes-
