CHAPTER 5 MANAGEMENT AND SETTING
5-9
7. Fusing temp.
1
Press the N or M key to select a media type.
Inch specifications
Fusing temp.:
1.Plain
Metric specifications
Fusing temp.:
1.Plain
2
Press the Enter key.
3
The selected item will flash. Press the N or M key to select
the fixing temperature for each media type.
>If “Plain” has been selected, select from 145 °C, 155 °C,
and 165 °C.
Inch specifications
Plain:
155°C*
Metric specifications
Plain:
155°C*
>If “Vellum” has been selected, select from 165 °C, 175 °C,
and 185 °C.
>If “Film” has been selected, select from 150 °C, 160 °C,
and 170 °C.
>If “Custom” has been selected, the temperature that has
been set for the custom media type will be displayed.
4
Press the Enter key. The display will show “set (
value
) *” and
return to the step 1 screen.
5
Press the N or M key to select “End” [“back”].
6
Press the Enter key. The printer will return to the machine
settings screen.
8. Custom paper
1
The selected item will flash. Press the N or M key to select
a media type.
Inch specifications
Custom paper:
Vellum*
Metric specifications
Custom paper:
Vellum*
2
Press the Enter key. The display will show “set (
value
) *” and
return to machine settings screen.
9. Standard size
1
Press the N or M key to select the type of standard size.
For an inch specification printer, select “Architecture” or
“Engineer”. For a metric specification printer, select “A sizes”
or “B sizes”.
Inch specifications
Standard size:
Architecture*
Metric specifications
Standard size:
A sizes*
2
Press the Enter key. The display will show “set (
value
) *” and
return to machine settings screen.
