5-3
Section 5 COLOR COPY SETTINGS
3. One-touch image quality adjustment
Select the image quality, for example “Vivid” or “Calm”, according to
the type of copy image you want.
NOTES
• This setting is only available with full color copying.
• This setting is NOT available in the auto exposure mode.
• This setting is NOT available for use together with the color balance
adjustment.
• Select one of the 6 available image quality settings. Multiple
selections are NOT possible.
• Selection is possible between 6 settings: Vivid, Calm, Modulation,
Smooth, Light and Heavy. For a sample of copies made under each
setting, see “Image quality adjustment samples” on page i.
1
Press the Color Edit key to light the corresponding indicator.
2
Use the M cursor or the N cursor key to select “c Quick
Image” and then press the Enter key.
Inch specifications
Metric specifications
Inch specifications Metric specifications
3
Use the M cursor or the N cursor key to select the image
quality setting that you want to use.
Inch specifications
Metric specifications
4
Press the Enter key. The image quality will be selected and
an asterisk ( ) will appear in front of the number for that
setting.
NOTE
In order to cancel the setting, use the M cursor or the N cursor key to
select that setting again and then press the Enter key. The asterisk
( ) will be removed and the setting canceled.
5
Use the M cursor key to select “z End” and then press the
Enter key. The message display will return to the “Ready to
copy.” screen.
Inch specifications Metric specifications
