1.3 Operation Precautions
1
1-9
Installation and Operation Precautions Chapter 1
1.3 Operation Precautions
Operating Environment
The environmental requirements for correct operation of the machine are as
follows.
● Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F
(10°C) within an hour
● Humidity: 15% to 85% with fluctuations of no more than 20% within an hour
Proper use
To ensure the optimum performance of the copier, follow the precautions listed
below.
- Never place heavy objects on the original glass or subject it to shocks.
- Never open any copier doors or turn off the copier while it is making copies;
otherwise, a paper jam will occur.
- Never bring any magnetized object or use flammable sprays or liquids near the
copier.
✚ Always make sure that the power plug is completely plugged into the electrical
outlet.
- Always make sure that the copier’s power plug is visible and not hidden by the
copier.
✚ Always unplug the copier from the electrical outlet if the unit is not to be used for
a long period of time.
✚ Always provide good ventilation when making a large number of continuous
copies.
- Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
- DO NOT attempt to perform any operations not explained in this handbook.
✚ CAUTION : Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
- Do not look directly at the light from the scanning lamp as it may cause your
eyes to feel tired or painful.
