Playing A Recorded Movie Clip
Please set the Mode Dial at Playback Mode Use Up
and Down Direction Buttons to select a movie clip.
Select a recorded movie clip.
Press Right Direction Button to play the movie clip.
Note
You can press Right Direction Button to pause the playing and
press Right Direction Button again to cancel the pause.
Going Into Thumbnail Images (Small Images)
Please set the Mode Dial at Playback Mode .
1. Press Left Direction Button to enter thumbnail image
table.
2. Use Up and Down to select an image or movie clip.
3. Press Right Direction Button to enlarge the selected
image or movie clip.
4. To go back to the thumbnail image table press Left Direction
Button again.
Note
When a thumbnail image is selected, please check if it shows on
the left top corner of the LCD screen. If is shown it means the
selected thumbnail is a movie clip but not a still image.
Deleting Image(s)
Please set the Mode Dial at Playback Mode and press Menu
Button to enter "Play" menu table.
1. Select "Delete"
2. (a) Select "Delete Image" to confirm the willing to delete the
selected image or movie clip.
(b) Select "Delete All" to confirm the willing to delete all stored
images or movie clips.
3. Select "No" to cancel the order or select "Yes" to delete.
4. Press Right Direction Button to confirm the setting.
( ). ( )
( )
( )
( )
( )
( )
( )
( ) ( )
( )
( )
( )
( )
( )
( )
Playback / Erasing
32
33
Installing Camera Driver
Under Microsoft Windows 98 / 98SE
1. Turn on the computer.
2. Insert the CD into the CD-ROM Drive.
If the PC is set to auto run the program, simply click "Driver"
to start the installation.
If the PC is not set to auto run the program, please go to the
Start Menu, click "Run" and key in
"CD-ROM Drive:\Camera.exe" and then click "OK" Button.
