64
Setting the auto shut-off time
The auto shut-off time can be changed from 3 minutes (default setting) to 10 minutes, or the
function can be turned off.
q Enter the SET-UP menu mode and press the
/ button to select “Auto Shut Off”.
“3 min” is selected.
w Press the
/ button to select “10 min”
or “Off”.
The setting will take effect at the time the
menu selection is made.
e Move to the next menu or set the main switch
to a mode other than
to exit the SET-
UP menu mode.
Note:
* Even if the selection is set to “Off”, the camera will auto-
matically shut-off after several hours.
Resetting the file number
The file number can be reset.
q Enter the SET-UP menu mode and press the
/ button to select “Number Reset”.
“Off” is selected.
w Press the
button to select “On”.
The setting will take effect at the time the
menu selection is made.
e Move to the next menu or set the main switch
to a mode other than
to exit the SET-
UP menu mode.
Note:
* When factory shipped, the number reset is set to “Off” and continuous file no. are assigned as shown below.
xxxxxx1.jpg xxxxxx2.jpg xxxxxx3.jpg
* If number reset is set to “On”, and there are no images within the card that were recorded with this unit, images
will be numbered from xxxxxx1.jpg. If there are images recorded with this unit, the number following the last file
no. will be used.
q
w
q
w
SET-UP
10min
Format
Self Timer 10sec
Beep On
Auto Shut Off
Number Reset Off
SET-UP
3min
Format
Self Timer 10sec
Beep On
Auto Shut Off
Number Reset Off
SET-UP
3min
Format
Self Timer 10sec
Beep On
Auto Shut Off
Number Reset On
SET-UP
3min
Format
Self Timer 10sec
Beep On
Auto Shut Off
Number Reset Off
