53
3.Press the adjust button to change
the blinking item.
• Data continues changing as long as the
button is held down.
• The date and time must be reset each time the batteries are replaced.
5.Press the select button until all items stop blinking to set the
updated information.
• The set date appears on the data panel and disappears after 5 seconds.
52
1.Press the main switch to turn the
camera off, then press the date
button to display the date.
2.Press the select button until the
item you want to adjust blinks.
• The next item will blink each time the
select button is pressed.
stops
blinking
SETTING THE DATE OR TIME
This camera has a quartz clock and automatic calendar through the year 2029.
FOR OWNERS OF THE QUARTZ-DATE MODEL
YEAR
MONTH
DATE
HOURS
MINUTES
4.Repeat steps 2 and 3 until all items on the date and time display
are correct.
