4 www.kodak.com/go/aiosupport
2
Configuring Your Printer
This section explains how to configure or change your printer settings and your
wireless network settings.
Configuring printer settings
NOTE: When you first power on the printer, the printer automatically steps you
through the process of selecting the
Language and Country/Region.
To set or change basic printer settings:
1. Press
Home.
2. Press to select
Printer Settings, then press OK.
3. Press to select one of the following settings:
•
Date and Time*
–Press
OK, then press to select Yea r , Month, Day, Hour, or Minute.
Press or to change the values; press
OK when you are done.
•
Button Sounds
– Press to select
On or Off.
•
Tim e t o Low Pow er
– Press to change the time to energy-saving low power (select from 1 to 4
hours in 0.5 hour increments). After the time to low power, the printer goes
into a low-power mode.
•
DPOF Printing
– Press to select
On or Off.
•
Language
–Press OK, press to select a language, then press OK.
•
Country/Region
–Press OK, press to select a country or region, then press OK.
•
Reset All Settings (see Resetting factory defaults, page 65)
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.
4. Press
Back to go back to the Main Menu.
* You can also synchronize the printer's date and time to your computer from
Home
Center Settings
under Tools in Home Center Software.
