- 27 -
To see the viewing contract information,
press MENU, Select DIGITAL and Press OK,
then Select Common Interface and press
OK.
When no module is inserted, No CI Mod-
ule appears.
Refer to the module instruction manual for
details of the settings.
Setting The TV
Menu System
Your TVs analogue part has been designed
with a menu system to provide an easy ma-
nipulation of a multi-function system. The TV
is controlled by choosing the commands,
which are displayed on the screen.
MAIN MENU
Press the MENU button. The main menu
will be displayed in the middle of the screen.
To select a sub-menu use or but-
ton, and press
or button or directly
press OK button.
In EXT-1, EXT-2 and EXT-4 modes, main
menu appears the same as in TV mode but
without Program sub-menu.
In EXT-3 mode, Main Menu appears as fol-
lows:
In DIGITAL TV mode, DIGITAL will appear on
the Main menu. Install and Program do not
appear.
Menu does not disappear automatically if it
is left on the screen.
Press MENU button again to remove menu.
Picture Menu
Press MENU button, now you are in main
menu. In the Main menu, select Picture
using or button, then enter the Pic-
ture menu by pressing
/ or OK but-
ton.
Setting Mode
As you enter the picture menu, Mode will be
the first item.
By pressing
or button you may
choose one of these options:
Soft, Standard and Bright.
Setting Contrast
Using
or button select Contrast.
Press button to increase contrast level.
Press
button to decrease contrast level.
Setting Bright-1
Using
or button select Bright-1.
Press
button to increase brightness.
Press button to decrease brightness.
ENG-20710W-17MB16P-1895UK-(LT-20DA6SK)-50076128.p65 18.10.2005, 08:3927
