5
Introduction
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
Component Names and Functions
Front
2
1
3
1
2
4
7
6
Back
5
8
3
5
4
1
Reset button
Resets the network settings when you press and
hold this button with the tip of a paper clip or the
like for 3 seconds or longer while the AC adapter is
connected. (
➭
page 56)
Use it e.g. if a wrong network setting has been
configured and a connection cannot be established.
2
LAN terminal
Connect a LAN cable to establish a wired connection
to the computer or access point (router). (
➭
page
11)
3
Network mode switch
Switches the network mode. (
➭
page 20)
DIRECT: To connect to a computer wirelessly (Wi-Fi)
WLAN: To connect to an access point (wireless LAN
router) wirelessly (Wi-Fi)
LAN(OFF): To establish a wired connection, or to
establish no wireless connection
4
Battery terminal
Connect a separately purchased battery pack (BN-
VG139U) e.g. when using outdoors. (
➭
page 29)
5
SD card slot
Insert an SD card here to save recorded data to the
card.
For compatible cards, see page 28.
6
Mic terminal
Connect an external mic to transmit/record external
sounds. (
➭
page 30)
7
DC connector
Connect the supplied AC adapter when using with
AC power. (
➭
page 12)
8
AV connector
Connect a separately purchased AV cord to watch
videos being transmitted/recorded. (
➭
page 31)
1
Internal mic (stereo)
Transmits/Records sounds coming through this mic
when no external mic is connected.
2
Lens
Be careful not to touch directly or let anything come
into contact.
3
LED light
Works as a light in dark places. Turn on/off from a
browser. (
➭
page 36)
4
Information lamp
Can be lit up to indicate the recording status, etc.
5
Camera sensor
Adjusts the white balance automatically. Make sure
that this sensor is not hidden behind any objects.
Camera
