Service-23
SERVICE
Service
Service Intervals
Lubricants
The following lubricants are preferred:
• Light Machine Oil (SAE30 API-S6)
• General Purpose Grease
• WD-40 or equal
Lubricate Lift Bars
Lubricate lift bars (A) with Light Machine Oil (SAE30
APIS6).
Lubricate Vertical Jack Shaft
Lubricate vertical jack shaft zerk (A) with General Purpose
Grease.
Before Each Use Check unit for loose fasteners.
Lubricate discharge chute.
Every10HoursorEachYear Lubricate all zerks.
Lubricate auger bearings.
Lubricate discharge chute.
Lubricate lift bar.
Check and adjust lift height.
Check skid shoes and scraper blade and replace if necessary.
Check V-belts and replace if worn.
Check snow auger and straighten if necessary.
As Required Check discharge chute drive tube.
Check lift assist springs.
Check skid shoes.
A
A
