SECTION 3—SAFETY INSPECTION CHECKLIST
Compass™SPT™ 26 Part No 1122134
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Ensure wheel locks do not interfere with tires when rolling.
❑ Ensure wheel lock pivot points are free of wear and looseness.
❑ Ensure wheel locks are easy to engage.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
Inspect/Adjust Weekly
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure hand grips are not loose.
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
❑ Ensure that the casters are free of debris.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Check pneumatic tires for proper inflation.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Monthly
❑ Ensure sealed bearings and axle nut tension are correct..
❑ Ensure there is no excessive side movement or binding when drive wheels are lifted
and spun.
❑ Adjust bearing system if wheel wobbles noticeably or binds to a stop.
❑ Inspect tires for flat spots and wear.
❑ Ensure wheel locks do not interfere with tires when rolling.
❑ Ensure wheel lock pivot points are free of wear and looseness.
❑ Ensure wheel locks are easy to engage.
❑ Ensure that the casters are free of debris.
❑ Inspect axles to ensure they are free from dirt, lint, etc.
❑ Inspect tilt slides and roller bearings to ensure they are free from dirt, lint, etc.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
