7
Insignia NS-DPF8/NS-DPF10 Digital Picture Frame
www.insignia-products.com
Using the clock, calendar, scheduled
ON/OFF function
This function provides a combination view of
calendar, real time clock, and continuous slide
show for the selected memory source.
This function can be selected by choosing
CLOCK on the
Select Mode
screen, then
pressing ENTER on the remote control or on the
frame.
Setting the internal clock
When the digital picture frame's internal clock is
set, you can use it as an alarm clock.
To set the internal clock:
1 Go to CLOCK mode, then press SETUP to
open the
Setup
menu.
2 Choose Set Clock.
3 Use or to move to a time or date field to
be changed.
4 Use or to change the value in the
selected field.
5 When the date and time are correct, press
the ENTER button to set the time and return
to the normal
Clock/Calendar View
screen.
Setting the alarm
Use your digital picture frame as an alarm clock.
You can set it to sound a built-in tone or play
pre-stored music with the filename
pd_alarm.wav in the build-in memory. You can
also set the alarm to alert only once or daily after
setup.
To set the alarm:
1 With the
Clock/Calendar View
screen
displayed, press ENTER to open the
Setup
menu.
2 Choose Set Alarm, then press Enter to open
a submenu.
3 Choose Set Alarm Time option to open
another submenu for changing alarm time.
4 When the alarm time settings are completed,
press ENTER to set the alarm and return to
the normal
Clock/Calendar View
screen.
Rotate Rotate the displayed
photo 90°
counterclockwise.
Zoom Zoom in on the
displayed photo.
Start Slideshow Start the slide show.
Set Clock Set Clock Set the internal
clock.
Set Alarm Set Alarm Time Set alarm time.
Alarm Setting Set alarm once, daily,
or no alarm.
Tone Default tone or
music tone.
Set ON/OFF Schedule Weekdays Turns on at xx:xx
AM/PM
Weekdays Turns off at xx:xx
AM/PM
Weekends Turns on at xx:xx
AM/PM
Weekends Turns off at xx:xx
AM/PM
Start Scheduled ON/OFF Start scheduled
ON/OFF control.
Power Saving • Off
•2 Hours
•4 Hours
•8 Hours
If unused for the
selected time period,
the digital picture
frame goes to power
saving mode. Any
button press on the
remote control or
frame wakes it up.
Brightness/Contrast Adjust the LCD
brightness and
contrast.
Color/Tint Adjust the LCD color
and tint.
Factory Default Reset all settings to
factory default
values.
Menu Option Settings Description
Note
The alarm defaults to Tone if the digital picture
frame is turned off.
