A SERVICE OF

logo

1-10
MDrive 34Plus
Microstepping Hardware - Revision R071108
Relevant to Firmware Version 3.0.02
Connector Options
The MDrive34Plus Microstepping comes in three Connector Options
12" (30.5 cm) Flying Leads1.
Locking Wire Crimp Connectors2.
Connector
Options
P2
P1
P1
P3
P1
P3
P4
P1
Type: 12’ (30.5 cm) Flying Leads
Function: Power, I/O and Encoder
(optional)
P1
Type: 12-Pin Locking Wire Crimp
Function: Power, I/O and SPI Comm.
P2
Type: 10-Pin IDC
Function: SPI Communications
P3
Type: 2-Pin Locking Wire Crimp
Function: DC Power
P1
Type: 12-Pin Locking Wire Crimp
Function: Power, I/O and SPI Comm.
P3
Type: 2-Pin Locking Wire Crimp
Function: DC Power
P4
Type: 10-Pin Wire Crimp
Function: Differential Encoder Outputs
Flying Leads Locking Wire Crimp Locking Wire Crimp
with Internal Optical
Encoder
Note: All Interface and
Connection Illustrations
in this document are
shown from this
perspective, Motor facing
right.
Pin 1
Pin 1
Pin 1
Pin 1
Pin 1
Pin 1
Figure 1.2.2: MDrive34Plus
Microstepping Connector Options