Using the Océ TDS800 to scan-to-file 85
4 Click Ok to accept the destination settings.
The destination properties are now locked.
Note: This option is only available if you are logged on as a Key operator (see
‘User modes’ on page 163).
▼ Unlock a destination
1
Select a destination.
2 Open the ‘File’ menu and select ‘Properties’.
3 Uncheck the ‘Locked’ check box.
4 Click OK to accept the destination settings.
The destination properties are now unlocked.
Note: This option is only available if you are logged on as a Key operator
(see ‘User modes’ on page 163).
▼ Delete a destination
1
Select a destination.
2 Open the ‘File’ menu and select ‘Delete’ or click the ‘Delete’ button on the
toolbar (see Figure 33).
[33] ‘Delete’ button on the toolbar
The selected destination is deleted.
Note: This option is only available if you are logged on as a Key operator or
as a Repro operator.
Note: You are not able to delete the last destination.
▼ Set / Change destination properties
1
Select a destination.
2 Open the ‘File’ menu and select ‘Properties’ or click the ‘Properties’ button on
the toolbar (see Figure 34).
[34] ‘Properties’ button on the toolbar
The ‘Destination properties’ screen appears as in figure 32 on page 83.
3 Change the destination properties as described in ‘Create a local destination’
on page 82.
