A SERVICE OF

logo

2-4 MegaRAID 8480 Hardware Installation
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
Figure 2.1 Example of MegaRAID Board Installation in a
PCI Express Slot
Step 7. Configure and Install the SAS and/or the SATA II Devices in the
Host Computer Case
Refer to the documentation for the devices for any
preinstallation configuration requirements.
Step 8. Connect SAS and/or SATA II Devices to the Storage Adapter
Use SAS cables to connect SAS and/or SATA II devices to the
MegaRAID 8480 Storage Adapter. Refer to Section 2.4, “SAS
Device Cables” for SAS cable information. Refer to
Section 2.4.1, “Connecting the MegaRAID 8480 RAID
Controller to Drive Boxes and Drive Expanders,” on page 2-8 for
details on connecting the controller to physical disks and
expanders.
Press
Here
Press
Here
Bracket
Screw
PCI Express Slot