A SERVICE OF

logo

Setting up your computer
You are now ready to assemble and start your computer.
1
If you have a printer, open the connector cover. Connect
one end of the printer cable to the parallel connector and
the other end to your printer. Then power on the printer.
2
If you want to use the CD-ROM and the diskette drive at
the same time, you can attach the diskette drive to the
external-diskette-drive connector as follows:
Insert the diskette drive in the diskette-drive enclosure and
connect it firmly 1. Connect the cable to the
external-diskette-drive connector 2.
1
2
2
1
3
Connect the AC Adapter to the computer's power jack (at
the rear of the computer) in the order shown.
3
2
1
4
Open the liquid crystal display (LCD).
Pull the LCD latches 1 and open the LCD 2. Then
position the LCD so that it is convenient for viewing.
1
1
2