Start DVDExpress by inserting the DVD into the DVD drive. The region code is
automatically set and you can see the movie. This is the initial setting.
After the region code has been set, if you insert a DVD whose region code is different,
you are prompted if you want to change the region code. You can change the region
code from your initial setting up to four times.
After the region code has been changed from its initial setting four times, it is fixed
and can no longer be changed. Thereafter, you can play DVD content only from that
region.
To display the region code status, do the following:
1 In the DVDExpress window, click DVD Options.
2 Click the DVD Region tab.
Starting DVDExpress
To start DVDExpress, do as follows:
1 Click Start, move the cursor to Programs, and click Mediamatics DVD
Express.
2 Click Mediamatics DVD Player.
The “DVD movie player” window appears. For more information on how to
play the DVD movie player, see the help for DVDExpress.
If you want to watch a DVD movie on your TV, refer to the online information
provided with your computer.
Notes:
1. Your computer has been configured to provide the highest quality audio and video playback
obtainable with the available system resources. You can alter the default settings by
changing the video resolution setting within the Control Panel of Windows 95 or Windows
98. Some systems do not have enough resources to provide full-quality audio and video
playback at all resolution settings. If you experience poor playback performance, adjust the
resolution to a lower setting.
2. Audio or video streams are decoded by software. The audio and video subsystems need to
be fully functional and enabled.
Part 1. About the 6X DVD Ultrabay 2000 Drive 1-5
