A SERVICE OF

logo

Error
Code
Message FRU/Action in Sequence
006 Equipment
Configuration
Error
Ensure the equipment
(diskette drive, hard
disk drive, keyboard,
external mouse, etc.) is
connected properly
and is correctly set in
the BIOS Utility.
Hard disk connection
board
Hard disk drive
System board
System Operation (Runtime)
103 Press <Esc>
to turn off NMI
or other key to
reboot
Enter BIOS Utility and
execute "Load Setup
Default Settings"; then
reboot the system.
Remove the non-
factory-installed
adapter card and
reboot the system.
Beep Symptoms
Symptom/Error FRU/Action in Sequence
Five short beeps,
power-on indicator
turns on then off and
LCD is blank.
Ensure that "System Boot
Drive" in the "System Secu-
rity" menu of the BIOS Utility
is not set to [Drive A].
Battery
Four short beeps
every minute and
system doesn't enter
hibernation mode.
Go to “Hibernation Mode” on
page 35.
Hard disk connection board
Hard disk drive
System board
No Beep Symptoms
38 ThinkPad i Series 1400 HMM