10
42688-01 • 05/08/09 • Hunter Fan Company
Go to Hardware Kit 7
WARNING: Use only the light xture supplied with this fan model.
7-1. To attach the lower switch housing assembly to the fan, partially
install two housing assembly screws into the upper switch
housing.
7-2. Connect the upper plug connector from the motor to the lower
plug connector in the lower switch housing assembly.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-3. Align the notches in the sides of the lower switch housing with
the screws on the upper switch housing. Twist the lower switch
housing and the light kit/speaker assembly clockwise to lock the
screws in place.
7-4. Install the third housing assembly screw.
7-5. Tighten all three screws securely.
Steps 7-1 – 7-2
Housing
Assembly
Screw
Upper Switch
Housing
Housing
Assembly Screw
Lower Switch
Housing
Plug
Connector
Notch
Steps 7-3 - 7-5
7 • Completing Your Installation With a Multi Staked Light Fixture
