Household Essentials 0-06124818-3 Manual

next previous

Diagram #5

SSEMBLY INSTRUCTIONS -Chair

Step 3

4. Place chair seat (C) upside down on a non-abrasive table surface. The rear

(tapered end) on the chair seat (C) should be near the table edge.

Hint: Protect the non-abrasive table surface and chair seat (C) by laying a towel

in-between the chair seat and table.

5. Place the assembled chair frame on the chair seat (C) as shown in inset (a).

Attach with six wood screws (7) as shown in inset (b).

6. Turn the chair upright. Make sure the assembled chair unit is level and square.

Tightly fasten all nuts and bolts with the open-end wrench (4) and Allen Wrench

(8)