4
Door Reversal
If you need to change the door opening side,
lower the appliance onto its back and follow
the pictorial instructions below,in numerical
order,to ensure doors function properly.
Note:You may require assistance to carefully lay
the appliance onto it’s back,onto a suitable
protective material (ie.the original packaging).
Insert the open door into the door bearing (A)
IMPORTANT:The door journal (B) must be in
front of the door switch (C)
Changing the door handle
Follow the pictorial instruction below,in
numerical order:
Attaching the base panel
The base panel (1) is enclosed with the
appliance and can be found,either within the
appliance itself or at the rear of the condenser
(black grille).
●
Slide the base panel (1) onto the plastic
guides (2),until it locks into position.
WARNING:Switch off electrical supply and pull out mains
plug.
Alternatively you may wish our Service
Department to quote for an Engineer to
carry out the conversion for you, call
UK:08709 066 066 or
Republic of Ireland:1850 302 200
