Shortcut keys operation
-8-
Connecting POWER
DISPLAY
INPUT TERMINAL
TV
Component
VGA
Scart
Antenna
Y PB/CB PR/CR
PC IN(D-Sub15)
Scart
Press POWER on the remote control to turn off the LCD TV, the POWER indicator will turn red.
Press POWER again to turn the LCD TV back on, the POWER indicator will turn blue.
ON/OFF Standby
Notes:1.Use a commercially available AC plug , if necessary, depending on the design of the wall outlet.
2.Always release the AC power switch or remove the AC power plug from the outlet when not using for
a long period of time.
ComponentComponent
VGA VGA
S-VideoS-Video
VideoVideo
ScartScart
S-Video
S-Video
NOTE: The explanation about Video,and S-Video signals.
1.In signal input, the use same channel.
2.In the meantime, only one of these two signals can be input and received, the other signals must be
unconnected. Otherwise, these signal will affect each other.
Videoand S-Video signals
TVTV
Video
Video
1. Turn on the power of the connected video equipment.
2 .Then p
.
3. The sound signal of all input signals except TV and Scart is input from same AUDIO INPUT terminals.
press the SOURCE button to
Scart,Video, S-Video, VGA or Component
enter the Source menu ress the button to select TV,
Selecting the signal source
[ or ]
