A SERVICE OF

logo

7-7
Advanced Concepts
Port Trunking
Advanced Concepts
Figure 7-4. Example of Configuring a Port Trunk
4. To assign another port to the trunk, repeat steps 3c, and 3d.
5. When you are finished assigning ports to the trunk, press [Enter], then [S]
(for S
ave) to save the new port trunk configuration and return to the
Configuration menu.
6. When you are finished configuring the switch, return to the Main Menu.
To Remove a Port from the Trunk: In step 3c, above, select the port you
want to remove from the trunk. In step 3d, continue pressing the Space bar
until the trunk assignment is blank.
Trunk Assignment
SEDONA.BK : sed_7.fm5 Page 7 Thursday, February 27, 1997 10:11 AM