Network Controller
Two embedded NC105i PCIe Gigabit Server Adapters
Expansion Slots #
Technology
Bus Width
Connector
Width
*
Bus
Number
*
Device No
.
**
Form Factor
Notes
1
PCI-Express
2.0
x16 x16
1 0
Full length,
full height
3.3 volts
1
PCI-X
***
64-bit
N/A
5 1
Full length,
full height
3.3 volts
2
PCI-Express
2.0
x16 x16
6 3
Low Profile
3.3 volts
2
PCI-X
***
64-bit
N/A
5 1
Low Profile
3.3 volts
NOTE:
All slots can accept universal keyed PCI cards
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
*** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz
when both slots have PCI-X cards installed.
Storage Controller
Non-Hot Plug SATA
Models
HP Embedded SATA RAID Controller (integrated into the south-bridge)
supporting SW RAID 0,1
NOTE:
Transfer rate: 1.5 Gb/s SATA
Hot Plug SATA/SAS
Models
HP SC40Ge HBA with RAID 0, 1
NOTE:
When using the SC40Ge with SATA Hard Drives, 1.5G SATA
Hard Drives are required.
NOTE:
Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS
NOTE:
A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating system installation from a
CD.
Storage
Optical Drives:
DVD-ROM
8x IDE (ATAPI) DVD-ROM drive, slim (optional)
DVD/CD RW
24x IDE (ATAPI) CD-ROM drive (optional)
Diskette Drives
Via USB only
Drive Bays:
Non-Hot Plug SATA
Up to 4 Non-hot plug SATA 3.5" drives
Hot Plug SATA/SAS
Up to 4 Hot plug SAS/SATA 3.5" drives
Maximum Internal
Storage
Non-Hot Plug SATA
3.0TB
4 x 750GB
Hot Plug SATA
4.0TB
4 x 1TB
Hot Plug SAS
4.0TB
4 x 1TB
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009
Page 5
