3-6 ENWW
Viewing the HP Inkjet Utility panels
The following options are available on the HP Inkjet Utility Panel menu.
WOW!: Prints a sample page to view the print output quality.
Test: Prints a test page or a diagnostic page.
Clean: Cleans the print cartridges.
Calibrate Device: Aligns the print cartridges.
Calibrate Color: Adjusts color to correct problems with tint.
Battery Level: Displays battery charge level information.
Configure Printer Settings: Lets you configure DPOF settings to print
from a CompactFlash card using DPOF files.
Estimate Ink Levels: Displays print cartridge ink levels.
Support: Provides access to the HP website where you can find support
for the printer and information about HP products and supplies.
Register: Accesses the HP website to register the printer.
Two-sided printing
You can print on both sides of a sheet of paper by manually turning a sheet of
paper over and feeding it into the printer again.
To print on both sides of a page, you must specify duplex options in your
software application or in the printer driver.
For Windows
1 Load the appropriate paper into the input tray. Be sure to load the paper
with the print side up.
2 Click Start > Settings > Printers to open the Printers folder.
3 Right-click the icon for the printer, and then click:
• Printing Preferences (Windows 2000 and Windows XP)
• Properties (Windows 98 and Windows Me)
• Document Defaults (Windows NT 4.0)
4 Click the Features tab, and then under Document Options, click
Two-Sided Printing (Duplex). Click OK.
5 Click Long Side or Short Side to select the page orientation.
For best results when printing, do not print on paper heavier than 24 lb bond
(90 g/m
2
) or on both sides of labels or transparencies.
