Hewlett-Packard CM4730 MFP Manual

A SERVICE OF

next previous

9. Push down on the DIMM until both latches engage the DIMM.

NOTE If you have difficulty inserting the DIMM, make sure the notch on the bottom of the

DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are

using the correct type of DIMM.

10. Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into

the MFP.

NOTE To prevent damage to the formatter board, ensure the formatter board is aligned in

the tracks.

ENWW Install memory and fonts 333