Installing the SAN Switch 2/8
29hp StorageWorks SAN Switch 2/8 Installation Guide
* Depending on time of purchase, the Fixed Rack Mount Kit items listed in Table 3
may not represent the kit that shipped with your switch.
Table 3: Shipping Carton Contents
Item
Number
Description
1 One HP StorageWorks SAN Switch 2/8
product accessory bag containing CD,
license, documentation and Release
Notes
2HP StorageWorks Switch 2/8
3 Two standard AC power cords, and two
PDU cords
4 One RS-232 Serial cable
5 *Fixed Rack Mount Kit containing:
• right front bracket
• left front bracket
• right rear bracket
• left rear bracket
6 Pouch containing Fixed Rack Mount Kit
hardware:
• 8-32 x 5/16” pan head Phillips
screws (6)
• 6-32 x 5/16” pan head Phillips
screws (8)
• 10-32 x 3/8” pan head Phillips
screws (8)
•retainer nuts (8)
• rubber mounting feet (4), use if
installing on a flat surface
