A SERVICE OF

logo

9
Select Maintenance > Feeder from the FlexColor menu bar. e
Feeder window opens.
Click on the Mount button.
e Mount feeder window opens, which guides you through each
step of preparing the scanner for the Feeder. e procedure here in
this manual also describes each step.
Click on the Continue button.
e scanner then positions itself to accept the Feeder and shuts itself
down. e Mount feeder window updates with new instructions.
Get the Slide Feeder and study its back panel. Locate the connector
(A) and two mounting pins (B) as shown in Figure 3 below.
5.
6.
7.
8.