Using Your TV
LED Backlit Flat TV Instruction Manual EN-13
EN
Adjusting the Time Settings
Sleep Timer
To automatically turn the TV off after a set amount
of time.
Auto Sleep
To automatically turn the TV off if there is not any
operation after a set amount of time.
OSD Timer
To automatically close the on-screen menu if there
is not any operation after a set amount of time.
Adjusting the Option Settings
OSD Language
To select the on-screen menu language.
Aspect Ratio
To select the screen display mode.
Blue Screen
Turn this setting on to display a blue screen when
there is no input signal.
Key Lock
Turn this setting on to lock the control buttons on
the side of the TV.
Caption (Philippines only)
To select the closed captioning mode.
Note
• You can also press the CC/ button to select the
closed captioning mode.
Hotel Mode
Hotel mode allows user to set certain default
settings, limit access to certain controls and
adjustments so that settings cannot be altered by
other people.
To access the hotel mode, you have to enter the 4-
digit password. Default password is “0000”. If your
password is lost, enter universal password “9443”.
Hotel Mode
To turn hotel mode on or off.
Note
• Hotel mode settings will be grayed out and cannot be
adjusted if Hotel Mode is set to Off.
Source Lock
To lock input sources.
1. Press S/T to highlight the input source that
you want to lock, then press OK to lock the
source (On).
2. Repeat above step until all the locked sources
are set.
Note
• The locked input source will not be displayed on the
Input Source list when you press SOURCE button.
Default Source
To select the default input source.
1. Press S/T to highlight the input source that
you want to set as the default input source,
then press OK.
Note
• Those locked input sources will not be displayed on the
Default Source list.
• If you select Off, the TV will turn on with the input
source when it was last turned off.
Default Prog
To select the default channel if Default Source is
set to TV.
1. Press W/X to select the preferred default
channel.
Max Volume
To set the maximum volume limit.
Channel Lock
To disable channel tuning and editing function.
Default Volume
To set the default volume level.
CHANNEL
PICTURE
SOUND
TIME
OPTION
Move Menu
Enter
Exit
ENTER
Sleep Timer
Auto Sleep
OSD Timer
Off
Off
10 S
CHANNEL
PICTURE
SOUND
TIME
OPTION
Move Menu
Enter
Exit
ENTER
OSD Language
Aspect Ratio
Blue Screen
Key Lock
Hotel Mode
First Time Installation
Reset
English
16:9
Off
Off
CHANNEL
PICTURE
SOUND
TIME
OPTION
Move Menu
Enter
Exit
ENTER
Hotel Mode
Source Lock
Default Source
Default Prog
Max Volume
Channel Lock
Default Volume
Off
1
100
Off
20
Off On
