ķ
9
Buttons and Connections on the Receiver
Rear of Unit
qZ
INPUT A Connection for satellite aerial (input A).
qU
INPUT B Connection for satellite aerial (input B).
wI
Ƕ
_
ǶǶ
_
On/Off button for LNC supply voltage.
ON...OFF
w?
É
Terrestrial aerial input (VHF/UHF).
w`
ɯ
Modulator aerial output (VHF/UHF).
wQ
REM. CONTR. VCR Connection for remote control via a video recorder
(see chapter "Timer Menu").
On reception of commands via this socket, the "
VCR-REC
" indication is flashing.
wW
AUDIO OUT R/L AF stereo output, left/right channel.
wE
EURO AV TV EURO-AV socket (output) for TV set, with RGB looping-through from decoder socket.
wR
EURO AV DECODER EURO-AV socket (input/output) for PAL/MAC decoder or additional video recorder.
wT
LNC-Power 14/18 V Individual 14/18 V LNC voltage adaption by ± 2 V (on the bottom of the receiver).
wZ
EURO AV VCR EURO-AV socket (input/output) for video recorder or additional PAL decoder.
wU
10-pin connector strip:
Pin Designation Connection
11 0/12 V/0.1 A Switching voltage output for LNC switching, relay, etc.
12 AGC Field strength measuring output for precise aerial adjustment.
13 GND Earth (ground)
14 +5 V/0.2 A Output for motor-driven polarizer, actuator.
15
–
I
–
I
–
POL. Control pulse voltage (output) to motor-driven polarizer.
16 MAGN. Current output for magnetic polarizer, ±70 mA/max. ±12 V
17 GND Earth (ground)
18 M2 Supply voltage for rotary motor, 36 V (positive on east run).
19 M1 Supply voltage for rotary motor, 36 V.
10
–
I
–
I
–
Control pulse voltage (input from rotary motor).
eI
DC OUT 15 V / 0,8 A 15 V / 0.8 A output for connecting external units (e.g., decoder).
e?
220 - 240 V ~ Connection for plug-in mains cable. Pull mains plug to disconnect the unit from the mains!
50 - 60 Hz
910 . . .2050MHz
REM. CONTR. VCR
POL.
MAGN.
