QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
OVEN WILL NUT
COME ON
CONTROL PANEL
LIGHTED, YET
OVEN
WILL NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
“FFFF”
APPEARS
ON DISPLAY
“EEEE” APPEARS
ON DISPLAY
“PROB” APPEARS
ON DISPLAY
POSSIBLE CAUSE
● A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
reset circuit breaker.
G
Unplug your microwave/convection oven, then plug it back in.
● Make sure 3-prong plug on oven is fully inserted into
wdl
receptacle.
● Door not securely closed.
● START pad must be touched after entering cooking selection.
● Another selection entered already in oven and CLEAWOFF pad not touched
to cancel it.
“
Make sure
you
have entered cooking time or temperature after touching
COOK pads.
-
CLEAWOFF pad was touched accidentally. Reset cooking program
and
touch
START pad.
●
Temperature
probe
not inserted properly during Temperature
Cook
function or not being
used during
Auto
Roast.
●
Make sure you have entered a desired finished temperature after setting Temperature
ROAST or-AUTO DEFROST pads.
●
Make sure you have entered a code number after touching Combination COOK pad
for Combination Time Cooking or Combination Temperature Cooking,
● Not enough time set when
using
Time Cook function because starting food
temperatures vary.
● The density and amount of foods will vary
and
thus may need more time for
completion.
*
Dish in
Auto
Cook not covered as directed.
● Check Cookbook and Microwave Temperature Cooking section for specific
probe placement.
~
Incorrect code numbers entered after touching AUTO COOK or
AUTO ROAST pads.
● Incorrect power level entered.
● Dish not rotated, turned
or
stirred if these instructions were
given
in the recipe.
● Too many dishes in oven at same time,
● Check Cookbook for correct accessories such as shelves and food placement
on
them.
. Incorrect finished temperature entered with temperature-controlled functions.
●
FIOW
of air blocked with convection or combination
cooking
functions.
● Indicates open or short circuit in any one of a number of components. Power is
shut off automatically. Request service.
Q
Impossible time of day such as
13:00
has been entered for clock.
● Temperature
probe
not plugged in securely when using Temperature Cook
Auto Roast.
If you need more help...call, toll free:
GE Answer Center”
800.626.2000
consumer information service
33
