Page 44
Part # MCOSM06 Rev 1 (11/03/08)
DOORS
To Remove Doors From Oven
1. Remove top front cap veneer.
2 Remove door change assembly (Note: The "A" model does
not come equipped with door chain).
3. Remove at head metal screw 1/4"-2-x1/2" from bearing
retainer.
4. Push the door toward the hinge and lift up. NOTE: The
bottom bearing retainer will stay in place.
5. Remove the right door in the same manner.
To Reinstall Doors onto Convection Oven
1. Reverse procedure above.
2. Close doors.
3. Reinstall the door chain.
Installing and Adjusting Door Chain
1. Make sure two links are between sprocket and door rod,
and there should be 8 regular links plus one master link on
the forward side of each chain.
2. Tighten up the buckles, the right door should close
approximately 1/2" before the left door.
3. Secure the turnbuckles by tightening the lock nuts.
urnbuckles
Locking Nuts
Door Stop Bolt
2 Links
8 Links
