9. DATA TRANSFER
9-3
9.1.4 Playing back data from a memory card
Data (track, waypoints, routes) can be loaded from a memory card and
displayed on the screen. This feature is useful for observing past data.
1. Insert the memory card to play back into the selected slot.
2. Open the MEMORY CARD list.
3. Rotate the [ENTER] knob to choose LOAD and then push the [ENTER] knob.
9.2 Uploading/Downloading Data
You can upload/download waypoints and routes from/to a PC or another
GP-7000/F to the internal memory, through the NMEA1, NMEA 2 or RS-232C
port at the rear of the display unit.
9.2.1 Uploading/downloading waypoints data
You may upload/download all waypoints data as follows.
1. Connect the PC or another GP-7000/F to the equipment.
2. Choose INPUT/OUTPUT from the ADVANCED menu.
3. Choose NMEA 1 OUTPUT, NMEA 2 OUTPUT or RS232 3 OUTPUT
appropriately.
The sentence window appears.
GLL
VTG
BWR
DBT
DPT
MTW
VHW
WCV
APA
APB
HDG
BOD
XTE
RMA
RMB
RMC
GGA
HSC
AAM
GTD
MWV
ZDA
WPL
RTE
TLL Out
On
On
Off
Off
Off
Off
Off
Off
Off
On
Off
Off
Off
Off
On
On
Off
Off
Off
Off
Off
Off
On
On
On
Sentences window
4. Choose WPL and then set it on.
5. Press the [CLEAR] key several times to close the window and menus.
6. Open the WAYPOINT LISTS.
