S R M - 8 0 A / E – S I G N A L R O U T E R / M O N I T O R
The optional fi ve-button SRM-RU allows re-
mote control of Speaker Selection, MONO and
DIM. An LED indicator is provided for each
button and a 10 foot cable is included.
We want to make it easy for you to set up your
SRM-80A. Page Two of this manual tells you
how to do just that, step-by-step. Page four
gives you detailed information on all of the
features, controls and connectors. You can
set up your SRM-80A fi rst, and read about the
controls afterwards or even better, just resume
The SRM-80A is intended for mounting in
standard 19" equipment racks. To avoid mar-
ring the panel when tightening the screws, use
nylon washers under the screw heads.
WARNING (For domestic units only): Do not
remove the third prong on the SRM-80A’s AC
plug. Never use a 3-prong to 2-prong AC plug
adapter to plug your SRM-80A into your wall
socket. The unit requires that a safety ground
be present for proper operation. Any attempt to
operate it without a safety ground is considered
im prop er op er a tion and could invalidate the
OUTPUT SELECT A: Use this input/output for
balanced, pro level devices. This four-position
knob determines which signal is routed to the
device plugged into the 1/4” “A” OUTPUTS on
the SRM-80A’s rear panel. For example, if the
“A” OUTPUTS are used for a DAT ma chine, the
