PS-PRO - POWER CONDITIONER/SEQUENCER
Current rating: 20 Amps (2400 Watts at 120 VAC)
Input Voltage: 85 to 264 VAC without damage
Mains Wiring analyzer: Detects one normal mode and five fault modes
Delay Intervals: Total elapsed ON or OFF delay time adjustable
from 1-60 seconds, with a single trimpot:
ON sequence: Delay 1 outlets go on immediately with switch.
Delays between outlets 1 and 2, and 2 and 3,
adjustable from 1-30 seconds each
OFF sequence: Delay 3 outlets go off immediately with switch.
Delays between outlets 3 and 2, and 2 and 1,
same as ON delays
Remote Switch: Screw terminals, 2 for switch, 2 additional for
optional LED (22 ga. minimum)
Spike Protection Modes: Line to neutral, neutral to ground, line to ground
Clamping Voltage, all modes: 200V peak
Response time: 1 nanosecond
Maximum surge current: 11,000 amps (8 x 20mS pulse)
Maximum spike energy: 550 joules total
Noise attenuation: Differential mode: Greater than 40 dB; Common
mode: greater than 60 dB; both 1 to 200 MHz
Dimensions: 1.75” H x 19” W x 10” D.
Weight: 6 lbs (2.7 kg).
Construction: Steel chassis, zinc chromate plating; .125”
brushed and black anodized aluminum front panel;
glass epoxy printed circuit boards.
Power Consumption: 11 watts
Safety Agency Approvals: UL, NRTL-C, C-UL, CE listed.
Optional: 220/240V Versions (units with “E” suffix only) are
intended for use in countries with nominal 220 to
240 volt AC mains. Their rear panel outlets use
internationally accepted IEC-320 connectors.
PS-PRO SPECIFICATIONS
Furman Sound, Inc.
1997 South McDowell Blvd. Petaluma, California 94954-6919 USA
Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: info@furmansound.com
0004-090202-D
