En-3
I
H
G
J
K
E
1
C
5
D
A
0
3
4
B
8
6
2
F
9
7
NAME OF PARTS
Remote controller
1
START/STOP Button
2
SET TEMP. (Temperature) Button
3
MODE Button
4
FAN Button
5
ECONOMY Button
6
TIMER MODE (CLOCK ADJUST) Button
7
DAY (DAY OFF) Button
8
SET BACK Button
9
SET TIME ( < > ) Button
0
TIMER DELETE Button
A
TIMER SET Button
B
Vertical Airfl ow Direction and Swing Button
C
Horizontal Airflow Direction and Swing
Button (This function cannot be used)
D
MAINTENANCE (FILTER RESET) Button
#1
E
Operation Lamp
F
Timer and Clock Display
G
Operation Mode Display
H
Fan Speed Display
I
Operation Lock Display
J
Temperature Display
K
Function Display
Defrost Display
Thermo Sensor Display
ECONOMY Display
Vertical Swing Display
Filter Display
#1
#
1:
Can be used if set correctly during installation.
Please consult authorized serviceman when
using this function.
WIRED TYPE
1
Air Filter (In Air Intake Grille)
2
Airfl ow Direction Flaps
3
Air Intake Grille
4
Remote Controller (Wired)
5
Control Panel
6
Remote Control Signal Receiver
7
MANUAL AUTO Button
●
When the MANUAL AUTO button is
pressed in for more than 10 seconds, the
forced cooling operation will start.
●
The forced cooling operation is used
at the time of installation.
Only for authorized service personnel's use
.
●
When the forced cooling operation starts
by any chance, press the START/STOP
button to stop the operation
.
●
Please press the button at FILTER
INDICATOR RESET.
8
OPERATION Indicator Lamp (Green)
9
TIMER Indicator Lamp (Orange)
●
TIMER Indicator lamp lights when the
timer is set from wireless remote control.
0
ECONOMY Indicator Lamp (Green)
●
ECONOMY indicator lamp lights when
ECONOMY OPERATION and MINIMUM
HEAT OPERATION is operating.
