●
7-16
16 Adjust FB Erasing Edges
1. Press “Next” or “Previous” and let the scanner display Screen 38.
Screen 38
2. At Screen 38, press or to select “Yes” and press . Then the scanner displays Screen 39.
Screen 39
3. At Screen 39, select “Yes” to return the settings to the factory default or select “No” to make new
settings (as shown below). Then press . The scanner displays Screen 40.
Screen 40
4. At Screen 40, press or to change the top setting. The value changes in 1 mm units. Then press
to activate the setting. The scanner displays Screen 41.
Screen 41
5. At Screen 41, press or to change the bottom setting. With (+:Up), the area is set upward from
the bottom edge of the image. With (–:Down), the area is set downward from the bottom edge of the
image. The value changes in 1 mm units. Then press to activate the setting. The scanner
displays Screen 42.
Screen 42
6. At Screen 42, press or to change the left setting. The value changes in 1 mm units. Then press
to activate the setting. The scanner displays Screen 43.
Screen 43
