Remote Control Receiver
Battery Installation (Optional)
4
Battery
Compartment Door
• Locate battery compartment door on back of remote control receiver.
• Loosen screw in battery compartment door with a Phillips screwdriver.
Lift to remove battery compartment door.
• Snap terminals of a fresh,9V alkaline battery into remote control
receiver connectors.
• Replace battery compartment door and tighten screw.
Do not over-tighten.
Battery Tips
• Remove the battery during long periods of non-use.Always
remove an exhausted battery from the product. Battery leakage
and corrosion can damage this product.Dispose of battery safely.
• Do not dispose of the battery in a fire.The battery may explode
or leak.
• Never short circuit the battery terminals.
• A non-rechargeable battery is not to be recharged.
• Only a battery of the same or equivalent type as recommended in
the “Battery Installation”instructions is to be used.
• If a removable rechargeable battery is used,it is only to be charged
under adult supervision.
• A rechargeable battery is to be removed from the product before
it is charged.
• If you use a battery charger,it should be examined regularly for
damage to the cord,plug,enclosure and other parts.Do not use
a damaged battery charger until it has been properly repaired.
9V (6LR61)
SHOWN ACTUAL SIZE
