A SERVICE OF

logo

7
Controlling the waste disposer
All electrical connections MUST be done by a registered electrician. The waste disposer must
be connected to the power supply by an earthed 3-pin outlet socket, mounted adjacent to the
waste disposer under the sink.
Wall mounted switch
The waste disposer can be controlled by means of a wall mounted power switch, positioned
500mm minimum away from the sink.
Bench mounted air switch
An alternative option to a wall mounted control switch is a bench mounted air switch positioned
within easy reach next to the sink.
We recommend using an Easy Fit by Fisher & Paykel Air Switch, which is available as an optional
accessory from your Fisher & Paykel retailer or can be purchased through Fisher & Paykel Spare
Parts (Part no. 2001105).
Installation instructions
ELBA_Wastedisposal_UG.indd 7 10/22/08 6:22:47 PM