6
USING YOUR COOKTOP
1 Identify the dial of the burner you want
to use.
3 After the burner has lit, adjust the flame
anywhere between HI and LO.
●
Do not adjust or leave the dial
between HI and OFF.
2 Press down (a) then turn anti-clockwise to
HI (b).
●
The halo will glow red. The halo’s of the
other burners will glow white.
●
The ignitors will start clicking as they
spark.
●
If there is no clicking, there is no spark
to light the burner. If the burner fails to
light turn the dial back to OFF and see
‘Troubleshooting’.
4 When you have finished cooking, turn the
dial clockwise back to OFF.
●
The halo will turn white, or if all the
other dials are in the OFF position, all
the halos will go out.
●
Check that the burner has gone out.
●
Before leaving the kitchen, check that
all burners have been turned off (all of
the halos have gone out).
Burner
indicator
