A SERVICE OF

logo

Open as PDF
next previous
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
196
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees
options
Use this option to change the position of the printed image in relation to the set location of a
card's Magnetic Stripe or smart chip.
Step Procedure
1
Select the Rotate Front 180 Degrees option to rotate the image on the front of
the card by 180 degrees when printed.
OR
Select the Rotate Back 180 Degrees option to rotate the image on the back of
the card by 180 degrees when printed.